top of page
SYSTEMS
SLIDING
There are two variations, and they can have multiple panels:
Sliding with track: A track is installed on the floor using double-sided tape, no drilling holes on the floor. Also, a guide is required on the ceiling to keep the panels straight.
Hanging: This option does not need track on the bottom; instead, all the weight is supported by the top track. Reinforcement is required on the ceiling for this one
The thickness of the system is about 3".
BI-FOLD
A track/guide is installed on the ceiling, and drillings are needed on the floor; on one side if it is a 2-panel system, and on both sides if it is a 4-panel system.
This system provides much more access space due to the folding mechanism of the panels.
The thickness of the system is about 3".
HINGED
Casing is installed to your side walls if your closet does not have side panels. Doors are hinge similar to the cabinets for swing access.
The thickness of the system is about 3".
Our frames are made of aluminum extrusions (5 profiles with 45° cut ends and assembled using corner pieces).
We carry 5 shapes and 6 finishes. The thickness of the frames varies between 13/16" to 7/8".
1021
The classic looking with 2" of visible aluminum frame
1022
Looking for a vintage style? The beveled 1022 might be a perfect match
1040
Our most famous style with 1/4" of visible aluminum frame
1042
"The thinnest" and elegant, nearly full insert with 1/16" of visible aluminum frame
1070
Sleek and contemporary profile with 1/4” of visible aluminum frame
GALLERY
GALLERY
bottom of page